At 09:58 PM 7/28/97 -0400, you wrote:
>I ordered some stuff from Summit today...MSD 6AL, Blaster 3, and Plug wires,
>and do you know that MSD does not make a set of wires for a V8 Dak, so i
had to
>order the universal kit and must make them myself....aint that some sh**.
I went thru the same thing with my Moroso wires.....not *that* much of a
PITA. Taylor makes custom fit wires for the Daks. Don't forget to look
into a brass cap and rotor for the future. The hot spark from the MSD will
eventually eat the stock ones.
>I want too hear more about the shift kit stuff as well as crower rockers
Here's a little note I got back from Crower yesterday:
We recommend a 1.7 rocker and a 307 lobe lift cam on both the int and exh,
giving you .520"
lift at the valve and 216 dur @ .050, 282 adv dur. This is single
pattern design due to the heavy vehicle and low operating rpm power
range. Cost of the rocker kit is $413, cost of the cam regrind is $98.
Send existing core to:
Crower Cams
3333 Main Street
Chula Vista, Ca 91911-5899
Attn: Brian
-- Thanks for your interest in Crower,Crower Tech http://www.crower.com
> Magnum Valve Covers - 137.00 Pair with Gaskets, Bolts, Filler >Cap, Gromets-Sounds a little high to me with mail order quoting about $95 for >same thing....opinions?
Get 'em from Summit. Save yerself a few pennies and blow it on sumthin' else for the truck. I think Summit can get ya just about anything from Mopar Performance.
*******************************97 Dakota Sport******************************* sean meldrum
email: Home: spm@c3net.net (list subscription) Work: sean_p_meldrum@auto.ittind.com
Homepage: http://www.geocities.com/MotorCity/Downs/7875/
Black, 318, 5spd, 3.55SG, reg. cab, 2wd, buckets All exterior vinyl graphics removed "Fresh air by Meldrum" "Pilone Throttle Body" Moroso Blue Max plug wires and Spectre looms DynoMax Race Magnum Welded. 3" in/out, exiting before axle. MSD 6A & Blaster 2 coil w/ chrome cover Pioneer DEH-435 CD Receiver **************************************************************************** ****
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:49 EDT