Re: Tires & Rims

From: Glenn & Lynn Vanderburg (vanderbu@silk.net)
Date: Fri Aug 15 1997 - 21:48:58 EDT


can you get body lifts at any setting like 1 inch 2 inch etc.
who makes them and how much do they run ?
Is it an easy thing to do ?
Glenn

----------
> From: BadDakota1@aol.com
> To: dakota@ait.fredonia.edu
> Subject: Re: Tires & Rims
> Date: Thursday, August 14, 1997 7:14 PM
>
> In a message dated 97-08-14 10:25:43 EDT, you write:
>
> << I hope you have more room than I did on my 94 2 wheel drive.
> I stepped up to some Michelins 235/75R15 and she rubs when I make sharp
> turns. Heavens knows just what will happen if I hit bumpy roads and turn
> sharp all at the same time?
> Glenn. >>
> i had 31X10.5's on my 94 2wd.......witout a body lift they would rub on
hard
> bumps (off road) but with a 3 inch body lift they were fine.....the only
> thing is they will rub if you turn all the way.......the frame is
different
> on the 4X4's so they don't rub....but they did fit on the stock rims.
>
> Russ
>

 



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:50 EDT