Re: FW: JTEC code display

From: Andy Callahan (quasideedle@uky.campus.mci.net)
Date: Thu Sep 25 1997 - 18:27:45 EDT


At 04:00 PM 9/25/97 -0500, you wrote:
>On 09/25/97 13:00:06 you wrote:
>>
>>At lunch today, I tried this on-off-on-off-on test on my '98. Nothing
>>happened. No flashing lights, no codes on the odometer, nothing on the
>>overhead computer, the truck just came alive as normal (i.e. radio on,
idiot
>>lights all on, fuel pump on, etc. It appears that this does not work on
the
>>'98s...at least not mine. Anyone else out there with a '98 care to try
this?
>>Geoffrey Hausheer
>>Intel Corp.
>>Hillsboro, OR 97007
>>
>I've tried this several times on my '97. I get the same (no) response.
>
>Dave Thede
>'97 Dakota Sport CC V8/5-spd 4x4
>K&N FIPK clone
>

The codes are not immediately visible on the odometer. First the mileage
comes up and after a few seconds of delay, the codes will appear. So,
after you turn it on for the third time, watch the odometer, but be
patient. Trust me, it works on the '97s and I would assume the same for
the '98s.
Andy

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  Andy Callahan University of Kentucky quasideedle@uky.campus.mci.net
        
  '97, black/mist gray, 4x2, Sport, club cab, 3.55 SG, 5-speed, Tire &
         Handling Package, all the little goodies
  Mods: Firestone Firehawk SS10 275/60/15's, GT Classic steel tonneau
         cover, "Super Sucker" FIPK by Air Meldrum, CC bed mat
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:53 EDT