I have the Mopar headers and cam on my '97 5.2L, 4x4, 5sp, reg cab. So a
definate "yes" to the cam. As far as the headers, since they connect to
the stock exhaust where the factory "Y" pipe use to be, they "should"
fit (assuming that the only difference in the CC vs reg cab is from
behind the drivers seat back, and the headers are connected before then.
Be forewarded, the headers are NOT a bold-on; there is some cutting and
welding required...
Craig
____________________________________________
Craig Baltzer - Anjura Technology Corp - Ottawa, Ontario
cbaltzer@anjura.com - (613) 727-1411
_____________________________________________
> -----Original Message-----
> From: DAVID D. THEDE [SMTP:tnadoman@ix.netcom.com]
> Sent: Saturday, October 18, 1997 7:53 PM
> To: dakota-truck@buffnet.net
> Subject: DML: '97 Mopar headers
>
> Does anyone know for sure if the Mopar headers for the '97 Dakota CC
> V8
> 5-spds are available yet? I think someone from Canada had them
> installed. The same goes true for the cam kit. Does anyone know if
> this
> is now available.
>
> Will be having the Gibson dual cat-back system installed Tuesday. Will
>
> get pictures scanned as soon as possible.
>
> Dave Thede
> '97 Dakota Sport CC V8/5-spd 4x4
> K&N FIPK clone
> Gibson dual cat-back tuesday
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:55 EDT