Rob Robinson: Don't know about the newer Oil Pressure sending unit
with the two wire connector, but the older ones with the single wire
connector, were very bad to spring a leak. It is located by the
Dist., so could be the culprit. A very cheap item to replace compared
to a rear main.
Good luck.
>> can't tell if it is a rear main seal, but I can kindof see the back
of
the beerbarrel intake has some oil (and dirt) around the oil pressure
sending unit and distributor.<<
Azie
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:59 EDT