A few months ago, I e-mailed Craig regarding headers and cam kit for
'97 V8/5-spds. My question is...Craig, if your out there...or anyone
else, what are the part numbers for the headers and cam? I went to my
dealer and they didn't have the newest performance catalog. They did
say the cam would cost about $500 in labor alone.
They weren't sure the headers would pass Virginia's emission tests but
said the cam alone would help performance.
If anyone has the part numbers for the '97 Mopar headers (v8/5-spd) and
cam kit, I would appreciate it.
BTW...I just ordered a SnugTop SnugLid (fiberglass toneau cover) for my
'97. It will take 4 to 10 weeks to recieve, I'll post pictures when its
on.
Dave Thede
'97 Dakota Sport+ CC V8/5-spd 4x4
K&N FIPK clone
Gibson split rear cat-back
http://xoom.com/tnadoman
You wrote:
>
>I have the Mopar headers and cam on my '97 5.2L, 4x4, 5sp, reg cab. So
a
>definate "yes" to the cam. As far as the headers, since they connect
to
>the stock exhaust where the factory "Y" pipe use to be, they "should"
>fit (assuming that the only difference in the CC vs reg cab is from
>behind the drivers seat back, and the headers are connected before
then.
>Be forewarded, the headers are NOT a bold-on; there is some cutting
and
>welding required...
>
>Craig
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:59 EDT