Re: 360 prices

From: Daniel Colucci (djcolucci@worldnet.att.net)
Date: Thu Dec 18 1997 - 21:55:41 EST


I still don't know if I can buy me one. I'll have to give a lot of
baseball lessons to make that kind of cash!!!! But we have a long time
untill the summer here in Chicago. By the way, it was a balmy 45 degrees
out here today.

Dan

----------
> From: N2mopars <N2mopars@AOL.COM>
> To: dakota-truck@buffnet.net
> Subject: Re: DML: 360 prices
> Date: Thursday, December 18, 1997 7:10 PM
>
> In a message dated 97-12-18 18:41:16 EST, you write:
>
> << Hey guys!
>
> I have just got off the phone with Dave Hughes from Hughes engines about
> building me a 360 for my 94 Dakota. Here's what he had to say: 360
block
> prepped with Ross blower pistons 9.25 to 9.5:1, (I am currently running
a
> Vortech), race prepped rods, torque plate hone, align bore, grind the
> crank, ARP bolts throughout, custom ground blower cam with lift of .524
and
> lobe separation at 112 degrees, high volume oil pump and windage try,
> balanced and blueprinted, square deck the block, double roller timing
> chain, o-ring the block, copper head gaskets, with magnum heads with
2.02
> valves race prepped with a port and polish. All assembled without
intake
> and throttle body, $3670.00 if I supply my heads.
> Dave said that this combination with my Vortech added would be good for
at
> least 550 hp.
>
> Plus now I would need a four barrel manifold with the four barrel
throttle
> body and a new set of inectors. Approximate cost $1500.00. Then I would
> need a computer to run it all. This would be the major problem. I'll
keep
> everyone posted.
>
>
> Dan
>
> 94 sport 5.2 with a lot of goodies >>
>
>
> Hey Dan, can you buy me one too? Thanks!
>
> Brad
>
> P.S. He he!!!!



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:04 EDT