Trust me, I'm going to remove the valve covers before painting.
Thanks,
Robert Trottmann
Bruce Aaron Hefner wrote:
> Unless the paint already on it is scratched up really badly or peeling you
> shouldn't have to strip it off, just make sure it is clean and dry before
> you paint, the technique Gene outlined would work okay, it's just
> personally I'd remove the parts to paint them, that way you don't have to
> worry about overspray getting on your truck.......
>
> Bruce
>
> >
> > I would pay someone else to remove the part, I'd take it over on the west coast and paint it
> > so I wouldn't overspray onto my truck, which I would leave in NC. Then I'd bring it back
> > after I was sure it was dry (a year or two.)
> > But seriously, I'm only thinking about Valve Covers and small items easily removed. On the
> > valve covers, though. What would the process be of painting? Do I need to strip the old
> > paint off? What about putting other stuff on it other than paint, i.e. primer/clear coat?
> > Robert Trottmann
> > rotrottmann@davidson.edu
> > Bruce Aaron Hefner wrote:
> >
> > >
> > > You can get the paint pretty cheap at any auto store, the only question is
> > > how confident are you in your painting abilities. :)
> > >
> > > Bruce
> >
> >
> >
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:23 EDT