Don't mean to state the obvious, but here is what I would look for:
1) make sure your wheels are all balanced
2) make sure your rims are true and not out of round
3) make sure your tires are true and not out of round
Best way to do this is to yank them off the truck and mount them up to a
spin balancer and check all three items above.
If you can locate a buddy with a good set of tires and wheels that will fit
on your truck, see if you can put em on your truck and take it for a test
spin...at least you can possibly narrow down the problem this way.
It doesn't sound like a drive line problem as those usually start at 35 mph
and have a tendency to smooth out by the time you hit 50.
If you already have the problem fixed and are looking for help with
Chrysler, I don't have any advice there other than getting a good attorney
(an oxymoron and I have yet to meet a good one)
*****************************************
-----Original Message-----
From: Ern3456 <Ern3456@AOL.COM>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Friday, March 27, 1998 10:15 AM
Subject: DML: Truck Vibration
>Hi i own a 96 Dakota and since day one it has had a vibration between the
>speeds of 45-75 mph i have brung it to many different chyslers dealerships
>and no one can seem to fix the problem and so i fdiled with arbitration and
i
>won, but chrysler refuses to fix the problem and i don't have money to
bring
>them to court, does anybody have a clue what to do, i would appreiate
any
>help thanks, ernie
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:32 EDT