--------------C0BE42C52FE6BC35BA18CC50
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
I have a 1991 dakota 4x4 with a 3.9. I'm having problems with my brake
lights. the fuse is ok but i'm not getting any power to the brake
switch. I don't know if the switch is bad or not because it is not
getting any power. I assume that there should be a hot lead going to the
switch at all times. has anyone else had this problem and if so could
anyone shed some light preferably brke light on the situation.
gery
sutherland
--------------C0BE42C52FE6BC35BA18CC50
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<HTML>
I have a 1991 dakota 4x4 with a 3.9. I'm having problems with my
brake lights. the fuse is ok but i'm not<U> getting any power to the brak</U>e
switch. I don't know if the switch is bad or not because it is not getting
any power. I assume that there should be a hot lead going to the switch
at all times. has anyone else had this problem and if so could anyone shed
some light preferably brke light on the situation.
gery sutherland</HTML>
--------------C0BE42C52FE6BC35BA18CC50--
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:37 EDT