Jon Steiger wrote:
>
> At 08:11 PM 5/8/98 -0400, you wrote:
> >In a message dated 98-05-07 19:12:37 EDT, you write:
> >
> ><< Has anyone researched higher flow injectors? Will the universal Accel
> > injectors from Summit fit? If knowone else has checked maybe I'll make
> > the call up to Summit or Jeg's.... >>
> >
> >
> >I haven't but would be interested in what you find out as maybe others here
> >would to. I have heard that all the injectors are made by the same company and
> >that there is a mustang injector that will work in and help the 5.2/5.9
> >engines ?? I read it in a mag some time ago.
> >
>
> Possibly Mopar Muscle? In their December '97 issue, they have
> a "Magnum Performance Tips" article with 14 mods to increase power.
> Number 7 has to do with fuel injectors. Down near the bottom they
> say:
>
> "Seimens, the military weapons system manufacturer, has an automotive division that makes injectors for all automotive manufacturers. They make injectors for GM, Ford, and Chrysler. Well...., you see, late-model Rustangs use an injector that supplies the engine with a few more pounds of fuel delivery beyond the OEM 360 units - and they're a drop-in for the Magnum. They're available from the Blue Oval store under part number M 9593 A302. MSD can also supply your Magnum with fatter injectors."
>
> From the article, it almost seems as if the injectors will only work
> on the 360, but I could be wrong.
>
Assuming that the rustang injectors fit, the next important question is
will the SBEC be able to compensate for the change in fuel flow and take
advantage of the increased delivery capability. The MP catalog has a set
of high-flow injectors, but claim that they are not compatible with the
stock SBEC.
jeff
98 rc 4x2 v8 5spd 3.55sg flares fipk
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:47 EDT