Good point Eric. That Dak probably has a 904 or A500. The tranz. will
handle the 318, but the torque converter probably won't. If your going to put
a 360 in, I would put in another tranz. too. But if you have the A904 or A500
and get a A727 or A518 then you will need a driveshaft to match (727's are
longer than 904's) which is another pain in the ass. Even more, the tranny
mount might have to be moved.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:04 EDT