On Thu, 9 Jul 1998 Boog318@aol.com wrote:
> Good point Eric. That Dak probably has a 904 or A500. The tranz. will
> handle the 318, but the torque converter probably won't. If your going to put
> a 360 in, I would put in another tranz. too. But if you have the A904 or A500
> and get a A727 or A518 then you will need a driveshaft to match (727's are
> longer than 904's) which is another pain in the ass. Even more, the tranny
> mount might have to be moved.
>
Speaking of which, how is the 5 speed (NV3500?) at handling the
additional output of the 360?
-Jon-
.--- stei0302@cs.fredonia.edu ------------------------------------.
| Affiliations: DoD, EAA, MP Race Team, NMA, SPA, USUA. RP-SEL |
| '96 Dodge Dakota v8 SLT CC (14.98@90.18), '96 Kolb FireFly 447 |
`----------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:04 EDT