Boog,
Just finished checking the parts books and this is what I found.
44RH is installed in late model Daks and Durango's, same gasket
as the 904
42RH was installed in earlier Daks with 318's and takes the same
gasket as the 727
46RH is installed in all Daks with the 360's and takes the same
gasket as the 727.
When your ready to order a pan, identify the tranny that you have and
measure the depth of your
your pan. The new pan needs to be AT LEAST as deep as your existing pan.
Frank
> -----Original Message-----
> From: Bruce Bridges [SMTP:bbridges@alarismed.com]
> Sent: Friday, July 31, 1998 7:13 AM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: Automatic Trans Tip
>
> franK,Boog,
> Yes there is! its p/n P4007886(steel) or P4120162 (chrome) from mopar
> perf.
> It fits good on a 904, cant speak to the fit on a 44RH(RE)...
> Bruce
>
> At 09:29 PM 7/30/98 EDT, you wrote:
> >Frank,
> >The 44RH(RE) is equivalent to a 904 while the 46RH(RE) is equivalent
> to a 727.
> >I think they have different trans. pans. I noticed that with the
> Tranny
> >filter kits we sell, they give you two different gaskets: one for
> the 904 and
> >one for the 727. THey use the same filter though. I would think that
> there is
> >an equivalent pan with a drain plug for the 904.
> >Boog
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:17 EDT