RE: power pulleys

From: STRICKLAND, Tate (tstricklan@shl.com)
Date: Thu Aug 06 1998 - 14:09:51 EDT


My message referred to the Summit pulleys - manufactured by march.
 Power amp pulleys are 199 - don't worry about the charging system.

Performance pulleys are 186.50 - worry about the charging - the
alternator is heavily underdriven on this set.

Performance uses the stock belt. Power amp uses a 6 rib belt because
a 7 rib isn't made in the needed size.

Tate

-----Original Message-----
From: Vanderburg [SMTP:vanderbu@silk.net]
Sent: Thursday, August 06, 1998 10:39 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: power pulleys

Do you need to replace the belt at the same time?
Are these the same 25% underdrive rate as the March's?
Will they cause you untold grief in the winter when you have the need
for
lights, heat, and brakes on allot due to a slower turning alternator?

-----Original Message-----
From: brian duffey <brian.duffey@intelsat.int>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Thursday, August 06, 1998 3:07 AM
Subject: re: DML: power pulleys

>Tate,
>
>See earlier post.
>Hypertech is now getting into the Dodge aftermarket.
>Power Pulleys & belt for the Dak (Part # 3082 and 1098) $146.90 and
$56.00
>respectively.
>This info. was supplied to me based upon my '95 Dak (5.2L).
>
>E-mail: sales@hypertech-inc.com
>For specific info. regrding yor vehicle.
>
>Duff
>-------------
>Original Text
>From STRICKT@SMTPGATE (Tate Strickland) {strickt@airmail.net}, on
6/8/98
>04:44:
>To: DAKOTA-T@SMTPGATE ("'dakota-truck@buffnet.net'")
>{dakota-truck@buffnet.net}
>
>I'll call Summit to see if they are the performance or amp models -
only
>interested in the amp model - don't need charging problems. As for
Hyper
>tech, they only advertise for ford and gm and mazda. They make
pulleys for
>freakin mazdas but not for CC products?
>
>Tate
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:18 EDT