The message that you sent to the above recipient was not delivered. All mail
sent to this account will continue to be returned until the recipient has
removed enough mail to lower the mailbox size below the system mailbox limit.
--Sprynet Network Operations Center Postmaster@sprynet.com 2001 6th Ave. Suite 3025B noc@interserv.net Seattle, WA. 95121 CompuServe/Internet Division
-----[ Orginal mail message follows ]-------------
> > In the service manual, service procedures for the TPS, voltage reference > for the TPS at WOT needs to less than 4.8 volts. Again I need to play > with this. > I hope that Dodge doesn't look at and set the idle voltage as baseline > at startup...... > Frank > > > -----Original Message----- > > From: N2mopars@aol.com [SMTP:N2mopars@aol.com] > > Sent: Thursday, August 20, 1998 4:52 PM > > To: dakota-truck@buffnet.net > > Subject: Re: DML: RE: Throttle bodies again.. (was: 98 R/T power > > mod's que stions) > > > > In a message dated 98-08-18 20:47:14 EDT, you write: > > > > << I suspect that something as simple as a resistor or > > re-clock on the TPS > > would be good enough if there is indeed a problem >> > > > > > > The your idle and WOT reference voltages might be off enough to trip > > the Check > > Engine Light. >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:24 EDT