In the service manual, service procedures for the TPS, voltage reference
for the TPS at WOT needs to less than 4.8 volts. Again I need to play
with this.
I hope that Dodge doesn't look at and set the idle voltage as baseline
at startup......
Frank
> -----Original Message-----
> From: N2mopars@aol.com [SMTP:N2mopars@aol.com]
> Sent: Thursday, August 20, 1998 4:52 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: RE: Throttle bodies again.. (was: 98 R/T power
> mod's que stions)
>
> In a message dated 98-08-18 20:47:14 EDT, you write:
>
> << I suspect that something as simple as a resistor or
> re-clock on the TPS
> would be good enough if there is indeed a problem >>
>
>
> The your idle and WOT reference voltages might be off enough to trip
> the Check
> Engine Light.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:24 EDT