Gary, I was thinking about lowering my Dak 1" front
& rear. Probably using springs in front and hangers
in back for that cool "R/T I'm gonna kick your @**"
rake.
Would I have to change anything else ? Shocks etc..?
Thanks
GS
> This is why I am working on a 2 inch drop only. This problem is most
> noticeable when you lower the vehicle without increasing the rate of the
> sway bar and/or the spring rate. My factory springs are 600 #/in, which =
> I
> always felt they were way to soft, the truck never really felt balanced
> (i.e. the front tended to bounce, not the kind of bouncing from worn out
> shocks).
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:27 EDT