At 11:47 PM 9/20/98 -0400, you wrote:
>There is actually a "gear" on the end of that sensor to connect it to
>the output shaft of the transmission and you change the "gear" to make
>the sensor send signals at a different rate to the JTEC and on to the
>speedo itself. There hasn't been a "speedo cable" connected to that gear
>for a number of years. For anyone thats interested, drop by the parts
>counter the next time you're at the Dodge dealer and they have a
>"blow-up" on the parts computer of the related components. Also, the
>Dak's have a separate category in the parts computer for "speedo pinion
>gears", and if the parts guy isn't familiar with the setup, he'll look
>under "Transmission" and "Differential" and tell you that there are no
>"speedo pinion gears" available...
>
>Craig
>
You know...
I think we might have to same dealer. Not really, but sounds dammed familiar.
Brian
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:53 EDT