I wonder how much clearance I would have by welding another plate on. The
one thats on it appears to be fairly thin... What exactely did you have in
mind Brad.
Thanks
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net
[mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of
N2mopars@aol.com
Sent: Sunday, December 20, 1998 10:38 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: Re:Intake Manifold Attn. VLAD
In a message dated 98-12-20 21:01:15 EST, you write:
<< I've heard of this too, but from what I've read, it acts more like a Heat
Sheild and adds a few Horsies into the mix... it's >>
Actually, that is a different mod. You weld another piece of sheetmetal,
with
the long ends folded up about a quarter inch to the stock manifold plate.
It
keeps hot oil from hitting the manifold. What I am talking about is instead
of the manifold plate being bolted on, you weld it on, so it cant leak. Of
course the manifold is aluminum, and the stock plate is steel, so you have
to
fabricate a plate from aluminum and have it heliarc welded on.
Brad
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:29 EDT