Jason,
Get yourself a Dremel Rotary Tool
(Or, better yet.. find someone who still needs to get you a Christmas gift!)
Never knew what I'd do with one of these until somone gace me one last year.
It is just the thing you need here .
Later,
Duff
-------------
Original Text
From JASON@SMTPGATE (Jason Jennings) {jason@spray-tech.com}, on 22/12/1998
12:10 PM:
To: DAKOTA-T@SMTPGATE ("'dakota-truck@buffnet.net'")
{dakota-truck@buffnet.net}
Grinding???? What needs to be ground and why???? The black housing
that fits on with the two bolts????? Hmm, gee, I kinda don't have a
grinder laying around....
Jason
12/22/98 12:14 PM
-----Original Message-----
From: Bernd D. Ratsch [SMTP:bernd@texas.net]
Sent: Tuesday, December 22, 1998 11:46 AM
To: dakota-truck@buffnet.net
Subject: RE: [Fwd: Re: DML: sweet headers for a
reasonable price]
Yep...that's the spot. You can remove it..may take a little
working..but
before you put it back on, grind part of the corner from the
housing so that
it slips back on easier than it came off.
Took me a total of 20 minutes to change the T'Stat. (Removal,
Grinding,
Installation)
Regards,
Bernd D. Ratsch
Pflugerville, TX
bernd@texas.net
http://lonestar.texas.net/~bernd
"Gonna buy me a Dodge Truck and blow those Fords off the
road....."
> -----Original Message-----
> From: owner-dakota-truck@buffnet4.buffnet.net
> [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of
Jason
> Jennings
> Sent: Tuesday, December 22, 1998 10:25 AM
> To: 'dakota-truck@buffnet.net'
> Subject: RE: [Fwd: Re: DML: sweet headers for a reasonable
price]
>
>
> Where do most of you guys grab your Stage One TBs???? I am
also curious
> as to the location of the illusive 180 Stat I have heard so
much
> about???? I was guided to look in the end of the radiator
housing where
> it meets the engine area???? That really nasty location
behind/below
> the AC lines????? Ok, that is right.... I have never done a
darn thing
> to a car that involved replacing stock items w/ cool initials
and/or
> anachronyms. Thanks...
>
>
>
> Jason
> 12/22/98 11:26 AM
>
>
>
>
> -----Original Message-----
> From: Bridges, Bruce [SMTP:bbridges@alarismed.com]
> Sent: Tuesday, December 22, 1998 11:09 AM
> To: 'dakota-truck@buffnet.net'
> Subject: RE: [Fwd: Re: DML: sweet headers for a
> reasonable price]
>
> Kevin,
> 15.2 E/T @ 89.72 W 2.216 60"time @ 85+deg and 75%
humidity. R/T
> CC
> w/6500miles on the clock, Mopar tonneau, spare, tailgate
and
> cooler of coke
> in the back. Mods: JBA shortys, Stage One TB, Burped
factory
> computer, cold
> air inlet to factory box, K&N drop in.
> Bruce K Bridges
>
> -----Original Message-----
> From: Kev99RT@aol.com [mailto:Kev99RT@aol.com]
> Sent: Tuesday, December 22, 1998 7:57 AM
> To: dakota-truck@buffnet.net
> Subject: Re: [Fwd: Re: DML: sweet headers for a
reasonable
> price]
>
>
> I ran a 15.7 when I got the truck, then I put synthetic
oil and
> a 14" K&N
> combined w/ a little cooler weather I ran 15'3's and now
with my
> new East
> Coast Customs hood (its not set up for ram-air yet and
when it
> is i'm
> expecting a few more tenths) mainly helping with weight
> reduction and a
> little
> more air flow I ran a 14.8@91. So far that is all the
mods I
> have done. Just
> to tell ya, I ran again last fri and backed up my 14.8
on tue.
> with a few
> more
> 14.8's I also ran a personal best '60 foot time of 2.090
in a
> run that I
> didn't rev up as much at the line. what are everyone
elses 1/4
> times with
> mods
> on R/T's?
>
> Kevin Wagner.
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:30 EDT