Thanks, will look into it....
Jason
12/23/98 11:12:01 AM
-----Original Message-----
From: Bernd D. Ratsch [SMTP:bernd@texas.net]
Sent: Tuesday, December 22, 1998 6:50 PM
To: dakota-truck@buffnet.net
Subject: RE: [Fwd: Re: DML: sweet headers for a
reasonable price]
Dremel is definitely the choice...but the Wizard from Black &
Decker works
great also. (It can use the Dremel bits and costs about $15.00
less)
> -----Original Message-----
> From: owner-dakota-truck@buffnet4.buffnet.net
> [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of
Jason
> Jennings
> Sent: Tuesday, December 22, 1998 12:19 PM
> To: 'dakota-truck@buffnet.net'
> Subject: RE: [Fwd: Re: DML: sweet headers for a reasonable
price]
>
>
> when I did the K&N filter. I quickly learned a Dremel tool
was the
> perfect gift for me..... Inexpensive and does just about
everything....
> Thanks, I already have my eye on one....
>
>
>
> Jason
> 12/22/98 1:22 PM
>
>
>
>
> -----Original Message-----
> From: brian duffey [SMTP:brian.duffey@intelsat.int]
> Sent: Tuesday, December 22, 1998 1:06 PM
> To: dakota-truck@buffnet.net
> Subject: RE: [Fwd: Re: DML: sweet headers for a
> reasonable price]
>
> Jason,
>
> Get yourself a Dremel Rotary Tool
> (Or, better yet.. find someone who still needs to get
you a
> Christmas gift!)
>
> Never knew what I'd do with one of these until somone
gace me
> one last year.
> It is just the thing you need here .
>
> Later,
>
> Duff
> -------------
> Original Text
> From JASON@SMTPGATE (Jason Jennings)
{jason@spray-tech.com}, on
> 22/12/1998
> 12:10 PM:
> To: DAKOTA-T@SMTPGATE ("'dakota-truck@buffnet.net'")
> {dakota-truck@buffnet.net}
>
> Grinding???? What needs to be ground and why???? The
black
> housing
> that fits on with the two bolts????? Hmm, gee, I kinda
don't
> have a
> grinder laying around....
>
>
>
> Jason
> 12/22/98 12:14 PM
>
>
>
>
> -----Original Message-----
> From: Bernd D. Ratsch [SMTP:bernd@texas.net]
> Sent: Tuesday, December 22, 1998 11:46 AM
> To: dakota-truck@buffnet.net
> Subject: RE: [Fwd: Re: DML: sweet headers
for a
> reasonable price]
>
> Yep...that's the spot. You can remove it..may
take a
> little
> working..but
> before you put it back on, grind part of the
corner from
> the
> housing so that
> it slips back on easier than it came off.
>
> Took me a total of 20 minutes to change the
T'Stat.
> (Removal,
> Grinding,
> Installation)
>
> Regards,
>
> Bernd D. Ratsch
> Pflugerville, TX
> bernd@texas.net
> http://lonestar.texas.net/~bernd
> "Gonna buy me a Dodge Truck and blow those Fords
off the
> road....."
>
>
>
> > -----Original Message-----
> > From: owner-dakota-truck@buffnet4.buffnet.net
> >
[mailto:owner-dakota-truck@buffnet4.buffnet.net]On
> Behalf Of
> Jason
> > Jennings
> > Sent: Tuesday, December 22, 1998 10:25 AM
> > To: 'dakota-truck@buffnet.net'
> > Subject: RE: [Fwd: Re: DML: sweet headers for
a
> reasonable
> price]
> >
> >
> > Where do most of you guys grab your Stage One
TBs????
> I am
> also curious
> > as to the location of the illusive 180 Stat I
have
> heard so
> much
> > about???? I was guided to look in the end of
the
> radiator
> housing where
> > it meets the engine area???? That really
nasty
> location
> behind/below
> > the AC lines????? Ok, that is right.... I
have never
> done a
> darn thing
> > to a car that involved replacing stock items
w/ cool
> initials
> and/or
> > anachronyms. Thanks...
> >
> >
> >
> > Jason
> > 12/22/98 11:26 AM
> >
> >
> >
> >
> > -----Original Message-----
> > From: Bridges, Bruce
> [SMTP:bbridges@alarismed.com]
> > Sent: Tuesday, December 22, 1998 11:09
AM
> > To: 'dakota-truck@buffnet.net'
> > Subject: RE: [Fwd: Re: DML: sweet
headers
> for a
> > reasonable price]
> >
> > Kevin,
> > 15.2 E/T @ 89.72 W 2.216 60"time @
85+deg and
> 75%
> humidity. R/T
> > CC
> > w/6500miles on the clock, Mopar tonneau,
spare,
> tailgate
> and
> > cooler of coke
> > in the back. Mods: JBA shortys, Stage
One TB,
> Burped
> factory
> > computer, cold
> > air inlet to factory box, K&N drop in.
> > Bruce K Bridges
> >
> > -----Original Message-----
> > From: Kev99RT@aol.com
[mailto:Kev99RT@aol.com]
> > Sent: Tuesday, December 22, 1998 7:57 AM
> > To: dakota-truck@buffnet.net
> > Subject: Re: [Fwd: Re: DML: sweet
headers for a
> reasonable
> > price]
> >
> >
> > I ran a 15.7 when I got the truck, then
I put
> synthetic
> oil and
> > a 14" K&N
> > combined w/ a little cooler weather I
ran 15'3's
> and now
> with my
> > new East
> > Coast Customs hood (its not set up for
ram-air
> yet and
> when it
> > is i'm
> > expecting a few more tenths) mainly
helping with
> weight
> > reduction and a
> > little
> > more air flow I ran a 14.8@91. So far
that is
> all the
> mods I
> > have done. Just
> > to tell ya, I ran again last fri and
backed up
> my 14.8
> on tue.
> > with a few
> > more
> > 14.8's I also ran a personal best '60
foot time
> of 2.090
> in a
> > run that I
> > didn't rev up as much at the line. what
are
> everyone
> elses 1/4
> > times with
> > mods
> > on R/T's?
> >
> > Kevin Wagner.
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:30 EDT