good find...i will check it out, thanks...
> -----Original Message-----
> From: Patrick Delgado [SMTP:dadoctah@worldnet.att.net]
> Sent: Saturday, December 26, 1998 6:33 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: sweet headers for a reasonable price(Jason)
>
> I checked a place called Internet Racers Supply
> (http://racernet.net/exh/jba.htm) and they have the JBA stainless
> steel
> bolt-in headers for the 97 Dakota 5.2 for $374.95 RETAIL! This price
> also
> includes S&H to the conus (SH*T! That means I got to pay through the
> nose
> for mine). We would better off dealing with these people for our group
> buy.
> There was no info on the site about coatings, but I'm sure you could
> ask
> about that. Even at that price, I would go for it.If they give
> us a group deal, so much the better.
>
> I saw a dyno test in a mag that the JBA shorties Matched the numbers
> of the
> JBA full lenghts. And
> I took a look under my truck this afternoon and was checking out the
> Y-pipe.
> The factory setup (at
> least on the 97's is pretty good. There are nice radii and the
> collector is
> well formed. The tubing diameter is not huge but it seems more than
> adequate
> for "natural" power.
> dadoctah@worldnet.att.net
>
> ----------
> >From: Jason Jennings <jason@spray-tech.com>
> >To: "'dakota-truck@buffnet.net'" <dakota-truck@buffnet.net>
> >Subject: RE: DML: sweet headers for a reasonable price
> >Date: Mon, Dec 21, 1998, 4:21 PM
> >
>
> >I called Mr. Jeff Bells inquiring about our DML group purchase for
> the
> >JBA headers. He referred me to Joe at ex. 104. It seems Joe will be
> >handling the purchase of the headers for the DML buyers. He quoted
> me a
> >price of $398 in change for stainless non-ceramic coating, and $133
> in
> >change or $130 something in change for the ceramic coating plus $16
> for
> >shipping & handling. I asked him for a time frame or deadline of
> >purchase. He was going with the past group buy. It seems there was
> a
> >30 day type of arrangement???? I just wanted to pass the info on.
> >Thanks....
> >
> >
> >
> >
> >Jason
> >12/21/98 11:26 AM
> >
> >
> >
> >
> > -----Original Message-----
> > From: Jack Hilton III [SMTP:HEMI@charter.net]
> > Sent: Sunday, December 20, 1998 7:23 PM
> > To: dakota-truck@buffnet.net
> > Subject: RE: DML: sweet headers for a reasonable price
> >
> >
> > Good goin , Bruce !!
> >
> > I haven't talked to Jeff in a while , and I'll forward this to
> >the Dakota
> > R/T list too !
> >
> >
> >
> >
> > At 02:21 PM 12/18/98 -0800, you wrote:
> > >DML,
> > >For R/T owners, Jeff Bell @ JBA has said that if you order the
> >headpipes (2"
> > >mandrel bent, 150.00 for chrome, 200.00 for ceramic coating)
> >then you can
> > >order the headers at the DML group purchase price. Not a bad
> >deal if you
> > >are interested in shorty headers and cant change the headpipe
> >style to a Y
> > >(CA smog , CARB etc...)
> > >Jeff Bells # @JBA: 619.265-3056x105
> > >BKB
> > >
> > >-----Original Message-----
> > >From: Jason Yates [mailto:j_hurricane_y@yahoo.com]
> > >Sent: Friday, December 18, 1998 11:54 AM
> > >To: dakota-truck@buffnet.net
> > >Subject: RE: DML: sweet headers for a reasonable price
> > >
> > >
> > >Another Jason is interested too, although I have a '98 Dak with
> >the
> > >318. I'd certainly love to be part of a discount like that.
> >The DML
> > >kicks $#@!
> > >
> > >Thanks,
> > >JY
> > >
> > >
> > >
> > >---Jason Jennings wrote:
> > >>
> > >> I am in if the group wants to buy for the end of Jan........
> >Thanks
> > >and
> > >> keep me in mind please....
> > >>
> > >>
> > >>
> > >> Jason
> > >> 12/18/98 2:36 PM
> > >>
> > >>
> > >>
> > >>
> > >> -----Original Message-----
> > >> From: Jack Hilton III [SMTP:HEMI@charter.net]
> > >> Sent: Friday, December 18, 1998 2:14 PM
> > >> To: dakota-truck@buffnet.net
> > >> Subject: Re: DML: sweet headers for a reasonable
> >price
> > >>
> > >> We are going to see how many are interested enough to
> >approach
> > >> JBA for
> > >> another group purchase in about the end of January .
> > >>
> > >> I got the Stainless Steel Ceramic Coated headers for my
> >R/T for
> > >> like $385
> > >> after shipping .
> > >>
> > >> stay tuned .
> > >>
> > >>
> > >> At 12:52 PM 12/18/1998 -0500, you wrote:
> > >> >Does anyone have info on after market headers for a '99
> > >> R/T..... I have
> > >> >checked out the JBA web site, and it is just a little
> >steep for
> > >> my
> > >> >wallet. I would love to find a nice set of kick ***
> >headers to
> > >> install,
> > >> >and would enjoy them more at a reasonable price.....
> >Thanks.
> > >> >
> > >> >
> > >> >
> > >> >Jason
> > >> >12/18/98 12:55 PM
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> Jack Hilton
> > >>
> > >> HEMI@charter.net
> > >>
> > >>
> > >
> > >_________________________________________________________
> > >DO YOU YAHOO!?
> > >Get your free @yahoo.com address at http://mail.yahoo.com
> > >
> > >
> >
> >
> > W . Jack Hilton III
> >
> > HEMI@charter.net
> >
> >
> >
> >
> >
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:31 EDT