Roger Heim wrote:
>
> Hi all,
> I've been lurking on this list for a few weeks and though now would be a
> good time to introduce myself (and ask a question!)
>
> My name is Roger Heim and I bought a 98 Dakota SLT in August. It is Light
> Driftwood and has the 5.2 V8, Auto Tranny, and power everything. I live in
> Wayne, New Jersey about 20 miles from New York City.
>
> Now my question. My first mod is a set of Steel Horse stainless steel
> steps. The driver's side steps went on with no problem but the bolt
> mounting the step to the bracket broke while I was torqueing it down. (I
> know the torque wrench was set correctly.)
>
> To make a long story short I had to drill out the bolt. Now I don't know
> whether to drill and tap the hole for a 5/8" bolt instead of half-inch, use
> some sort of coil insert and use the half-inch bolt, or something else
> entirely.
>
> Any advice?
>
> Roger Heim
> 98 Dakota SLT CC 4X4 Light Driftwood 5.2V8 Auto
Hey Rodger, Welcome to the list. I live in West Milford and travel Rt23
thru your neck of the woods often. I'll keep an eye out for you. I drive
a lowered 98 Med Metalic Red CC with a burgandy tonnue cover. Maybe
you've seen me on the road. Regards, Bob Nichols
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:31 EDT