It should be like the 98's, I hope. When I removed my panels, all I did
was rotate the little plastic thing attached to the arm away from it,
and then just pop it right out of the hole. It is real easy.
Later,
Geoffrey
~~98 DAK CC SLT 3.9L Metallic Red~~
>Date: Fri, 1 Jan 1999 13:26:37 -0600 (CST)
>From: David Gloff <dgloff@xnet.com>
>To: dakota-truck@buffnet.net
>Subject: DML: Door Panel Removal '97+
>Reply-To: dakota-truck@buffnet.net
>
>Today is the day I was going to install my stereo. I got all the
screws
>out of the door panel, but there's some sort of actuator mechanism
>attached to the handle that I can't figure out how to disconnect.
>Unfortunately, the Chilton's manual is not yet available. For those of
>you who've upgraded your speakers or installed mirrors in the 97+ Daks,
>how does this arm disconnect? Also, any other pointers on dash
removal,
>etc (especially power mirror controller) would be appreciated.
>
>David Gloff
>Frustrated with the door panels on my '99 Dak Sport Intense Blue CC
>
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:50 EDT