Re: Re: FW: Dr. Pat getting 4.7 Dakota (NOT)

From: Alan Short (ashort@flash.net)
Date: Thu Jan 07 1999 - 12:32:50 EST


Mark Kuzia wrote:
>
> I have checked with other poeple drag racing their Dakotas and found that
> they have the same problems. My friend had a jet in his Dakota also, his had
> different problems. When I took it back to the speedshop where I bought it,
> they showed me a stack of 5 Jet chips that had to go back!
>
> Mark.
>
> -----Original Message-----
> From: William Blount Arthur <m990198@nadn.navy.mil>
> To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
> Date: Wednesday, January 06, 1999 11:55 PM
> Subject: Re: DML: Re: FW: Dr. Pat getting 4.7 Dakota (NOT)
>
> >You might better send that one back and get another, I havent had any
> >problems with mine, been running it for 25000 miles now. Did you do
> >anything to increase the air flow to the motor. The Jet II is for engines
> >with headers K&N's TB's ect, not for stock stuff. The whole reason it is
> >stage II is because it adds more gas to make it not be lean from too much
> >air.
> >
> >Bill
> >'97 SS/T
> >
> >On Wed, 6 Jan 1999, Mark Kuzia wrote:
> >
> >> Don' t get the JetII! Yes the computer does adapt and try to go back, in
> my
> >> case it resulted in a bad misfire/rich condition. I had to remove the
> chip
> >> to fix it. It took about 3-4 days both times it did it.
> >>
> >> Mark
> >>
> >>
> >>
> >> -----Original Message-----
> >> From: Patrick Delgado <dadoctah@worldnet.att.net>
> >> To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
> >> Date: Tuesday, January 05, 1999 5:28 AM
> >> Subject: DML: FW: Dr. Pat getting 4.7 Dakota (NOT)
> >>
> >>
> >> >----------
> >> >From: "Patrick Delgado" <dadoctah@worldnet.att.net>
> >> >To: dakota-truck@buffnet.net
> >> >Subject: Dr. Pat getting 4.7 Dakota (NOT)
> >> >Date: Sun, Jan 3, 1999, 8:04 PM
> >>
> >> >As you may have read, I had a little mustang problem. The headers,
> sticky
> >> >tires and 180F stat
> >> >are here or on order. Now I need to get a JetII chip.
> >> >
> >> >1. Where can I get the best price?
> >> >2. Does the factory computer "adapt" to the Jet and gradually revert to
> >> >original settings?
> >> >
> >> >dadoctah@worldnet.att.net
> >> >
> >>
> >>
> >
> >
MY JET II WORKS FINE. 7,000 mi.ON IT. Alan S.



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:53 EDT