The V-8 t-body fit the V-6, but you have to open up the manifold to 2". My
experience is with the 98-99's only. When disassembled, the only difference
we could find was the bore diameter. all other items could be swapped
between them. It seems that a V-8 t-body makes sense, rather than goung to
the trouble of porting it.
One of the mopar mags had an article on this swap. I'll post the details
later.
Mark
-----Original Message-----
From: Bridges, Bruce <bbridges@alarismed.com>
To: 'dakota-truck@buffnet.net' <dakota-truck@buffnet.net>
Date: Monday, January 11, 1999 4:59 PM
Subject: DML: RE: Re: RE: Throttle Body Mods -Reply
>Mark,
>Your fiend's manifold was OK for the larger Butterfly Plate diameter of the
>V8 TB?? No rubbing in WOT? Im not sure but sounds like Mopar made a
change
>to the 6s manifolds! I wonder what year they cut over to the bigger
>diameter? How were the performance gains on the 6 w/the V8 TB?? We
(Frank)
>has found that the 6ers castings are different from the 8s, but we dont
have
>a handle on years etc...
>Bruce "greenhorn" Bridges
>
>-----Original Message-----
>From: Mark Kuzia [mailto:flyboy01@worldnet.att.net]
>Sent: Monday, January 11, 1999 1:42 PM
>To: dakota-truck@buffnet.net
>Subject: DML: Re: RE: Throttle Body Mods -Reply
>
>
>My 99' V-8 t-body is a direct fit with no problems on my fiend's 98 V-6
>t-body, all the sensors are the same. There are differences in years, amke
>sure that you stick with a t-body that says "Holley" if yours says it. When
>I ordered a new t-body, it came with all the sensors.
>
>Mark
>
>-----Original Message-----
>From: Michael Z-Sykes <msykes@su.edu>
>To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
>Date: Sunday, January 10, 1999 9:38 PM
>Subject: DML: RE: Throttle Body Mods -Reply
>
>
>>>>> It'll mount no problem...but what about the sensors/settings?? Are
>>any
>>calibrations required or just put the old sensors on the new TB??<<<
>>
>>The article doesn't really go into that much detail about sensors or
>>anything. I think the TB they gpt a;ready had the sensors in it. If not,
>you
>>could probably transfer your sensors from your 6ewr to the 8's TB. I
>>figure, if they had any problems with it, they would've told us =)
>>
>>-mike d.
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:57 EDT