Kyle,
I installed an MSD Blaster III coil to the factory mount using a (GACK!)
Ford Motorsports coil bracket. Very little work is required to mount it
there. I listed the mod on my webpage: http://home.att.net/~flyboy01
Mark
http://home.att.net/~flyboy01
-----Original Message-----
From: HKUSP40578@aol.com <HKUSP40578@aol.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Sunday, January 17, 1999 11:32 PM
Subject: Re: DML: Wimpy stock coil
>In a message dated 99-01-17 23:12:36 EST, you write:
>
><< << was under the hood of my Dak yesterday and noticed that the coil
looks
> very small and kinda wimpy. And what do all those wires that go in to
the
> underneath do?
> >> >>
>
>Well just as every other darn part of these trucks are computer controlled,
I
>am sure the coil is also. Now as far as upgrading to a 'hotter' coil, are
any
>other mods needed? I am hoping that putting on an aftermarket coil is a
single
>mod and I wont need to buy one of those ignition boxes., because I want to
get
>an Accel Super Coil. After upgrading coils, does anyone know if plug gap
needs
>to be changed/altered?
>Kyle
>93 Dakota 4x4 V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:04 EDT