RE: Any Ideas?

From: The Man From Utopia (tmfu@bellatlantic.net)
Date: Mon Jan 18 1999 - 15:42:46 EST


I would curious as to if Dan is geting any codes... I had the the dist plate
go south just the same way.

Greg
95 DSCC v6 5spd

> -----Original Message-----
> From: owner-dakota-truck@buffnet4.buffnet.net
> [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Joseph
> DaVolio
> Sent: Monday, January 18, 1999 2:55 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: Any Ideas?
>
>
> I could be talking from what I'm sitting on, but I had a similar
> problem with my
> old (86) Daytona 4cyl. It turned out to be the pickup plate in
> the distributer.
> The pickup plate is what replaced the points and condenser. I'm
> not sure what
> is in yours, but it is an idea.
>
> Joe DaVolio
> delivery very soon!!! 99 DAK CC Sport 5.2L 5spd loaded.
> (it was released from the factory on thurs, Jan 14.)
>
> >>> Dan Matthews <dakota_v6_89@hotmail.com> 01/18 2:13 PM >>>
> My '89 3.9L v-6 (fuel injected) Is turning over, but not starting.
> I started having this problem about a week ago.I drove it for about 3
> days with no trouble. It would start and then die in the middle of
> driving.The engine would just cut off in the middle of the road. Some
> mornings the engine would start, some it wouldnt. I've checked the spark
> coil, the plugs, and i've tried cleaning the throttle body with carb
> cleaner. Im not sure why the engine works sometimes, and doesnt others.
> Could this problem be related to the computer chip? Im up the creek
> without a paddle. Any help would be appreciated!
>
> Dan Matthews
> '89 Dakota LE
> 3.9L V-6, Auto, 2wd
>
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:05 EDT