I work at a car hifi shop and just put in the MTX Thunderform powered
off of a PPI ProMOS25 (200 watts 2 ohm),I swapped the 8ohm subs out for
4ohms to get a 2ohm load. Here is a little tip if you are going to put
in the MTX Thunderform yourself. I found that if you loosen the rear two
seat belt bolts and spin the mounts 90 degrees and then retighten the
bolts. The box drops right in. Also , plan on a few hours of tearing the
rear or your truck appart.
David Peterson
>From: Geoffrey Hackbart <ghack2@hotmail.com>
>To: dakota-truck@buffnet.net
>Subject: DML: MTX Thunderform
>Date: Sun, 24 Jan 1999 23:01:50 PST
>Reply-To: dakota-truck@buffnet.net
>
>I wanted to say thanks to the people that responded to my question
about
>this. I have decided to go ahead and buy the MTX thunderform. And I am
>going to also purchase a MTX 2150x amp to push 300 watts through that
>bad boy. If anyone wants, I will let them now how it sounds in the
>truck. Now the next thing to do it put new components in there. Man, I
>am going to spend alot of money. Oh well. Now let's see, what else can
I
>do. OOOOhhh, what's that over there.... oooohhhh pretty....
>
>Later,
>Geoffrey
>~~98 DAK CC SLT 3.9L Metallic Red~~
>
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:19 EDT