Alan, still looking for that length and width on the short belt your
using....When you have time....thanks.
> -----Original Message-----
> From: Alan Short [SMTP:ashort@flash.net]
> Sent: Friday, January 29, 1999 3:53 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: SHORTBELTS for JASON
>
> Dyno05@aol.com wrote:
> >
> > I have a short belt for my R/T ,
> >
> > part # 5060538 it is a Dayco polycog belt. It bypasses the power
> steering
> > and AC compressor.
> >
> > Dana
> >
> > p.s. I dont have any #s for this et wise because I havent tried it
> at the
> > track or on the dyno yet. It definately cant hurt though
> Bruce, I'd go with the biguns. P275/60R-15. 28"sidewall= lots of wrap
> up AND a shorter gear. I'm thinking the ratio reduction may cross over
> to higher trap speed. I've been told these Magnums actually like
> something in the 3.50 range. Usually 3.92-4.11 is too much. We'll see
> next weekend about that as my P275/40R-17's have a 25.7 " dia. which
> will be in the 4:1 area. Alan S.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:21 EDT