Jason Jennings wrote:
>
> Alan, still looking for that length and width on the short belt your
> using....When you have time....thanks.
>
> > -----Original Message-----
> > From: Alan Short [SMTP:ashort@flash.net]
> > Sent: Friday, January 29, 1999 3:53 PM
> > To: dakota-truck@buffnet.net
> > Subject: Re: DML: SHORTBELTS for JASON
> >
> > Dyno05@aol.com wrote:
> > >
> > > I have a short belt for my R/T ,
> > >
> > > part # 5060538 it is a Dayco polycog belt. It bypasses the power
> > steering
> > > and AC compressor.
> > >
> > > Dana
> > >
> > > p.s. I dont have any #s for this et wise because I havent tried it
> > at the
> > > track or on the dyno yet. It definately cant hurt though
> > Bruce, I'd go with the biguns. P275/60R-15. 28"sidewall= lots of wrap
> > up AND a shorter gear. I'm thinking the ratio reduction may cross over
> > to higher trap speed. I've been told these Magnums actually like
> > something in the 3.50 range. Usually 3.92-4.11 is too much. We'll see
> > next weekend about that as my P275/40R-17's have a 25.7 " dia. which
> > will be in the 4:1 area. Alan S.
I don't have a short belt, I got the info same as you, in fact it's on
the attached portion of your post from dana dyno5 Dayco #5060538.I'll
get one before next weekend when the track opens. Alan S.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:21 EDT