Think of it as water injection! Maybe you could raise the compression ratio
to 10.5:1 :P
-----Original Message-----
From: Jason Jennings <jason@spray-tech.com>
To: 'dakota-truck@buffnet.net' <dakota-truck@buffnet.net>
Date: Monday, February 15, 1999 4:34 PM
Subject: DML: RE: RE: RE: Cold air under the hood
>I c, hmm..... does anyone in the fluid group want to help out here????
>I would think taking a hose of some kind, and making a bend, not a
>crimp, a small bend. Kinda like an elbow type deal, where the corner is
>higher than the inlet. Maybe the direction change would grab most of
>the water vapor on the bend and gravity would pull it back down or
>something???? Either that or run a screen/filter at the inlet. This
>should filter out most of the vapor. How well does the K&N work with
>moisture, anyone, anyone, Faris, Faris.... I would think the K&N would
>filter out huge amounts of moisture???? What happens in the engine bay
>when it rains???? I would say water is flying around in all directions
>to some degree, right???? The bay is not water tight.... If you have
>an open element now, it must be seeing a small amount of water???? What
>about ram air hood, huge channels in the rain..... DO most scoops have
>filters at the inlet???? I have seen many home made hoods, and what
>have yous. Most of them look like rain traps to me, but some are daily
>drivers... Can the fluid group give us a bit of help????
>
>
>
>Jason
>2/15/99 5:06 PM
>
>
>
>
> -----Original Message-----
> From: Gonzalez, Javier [SMTP:GonzalezJ@repind.com]
> Sent: Monday, February 15, 1999 4:44 PM
> To: 'dakota-truck@buffnet.net'
> Subject: DML: RE: RE: Cold air under the hood
>
> I forgot to mention it in my first e-mail, but I'm not
>re-routing the stock
> filter, I have a big ass K&N cone.
>
> -----Original Message-----
> From: Jason Jennings [mailto:jason@spray-tech.com]
> Sent: Monday, February 15, 1999 4:26 PM
> To: 'dakota-truck@buffnet.net'
> Subject: DML: RE: Cold air under the hood
>
>
> well, yeah it does rain like heck in FL. I don't think I would
>re-route
> the stock filter to that little whole area.... Sounds like a
>pee pee to
> me if you do.
>
>
>
> Jason
> 2/15/99 4:24 PM
>
>
>
>
> -----Original Message-----
> From: Gonzalez, Javier [SMTP:GonzalezJ@repind.com]
> Sent: Monday, February 15, 1999 3:07 PM
> To: 'dakota-truck@buffnet.net'
> Subject: DML: Cold air under the hood
>
> Like must of you, I too have removed that piece of
>rubber
> material that sits
> behind the front grill on the passenger side. However, I
>was
> wondering, if
> the air intake is rerouted to the front, to take
>advantage of
> this new
> source of cool air, instead of the wheel well, wont
>there be
> problems with
> water coming in? I know, I know, rain has to be hitting
>the
> grill almost
> horizontally for water to come in there, but is that
>something
> to worry
> about if the air intake is right upfront behind the
>grill? I'm
> probably just
> being paranoid, but in Florida, when it rains it pours?
>What do
> you guys
> think?
>
> On another note, I forget who else was interested in
>info about
> a billet
> grill and billet bumper inserts, but here it goes. My
>wife just
> bought me
> the set from Autoaccessory.com. The grill was $99.95 and
>the
> bumper insert
> was $59.95. I should be getting them sometime this week
>or the
> beginning of
> next week at the latest. It comes with a 30 days money
>back
> guarantee,
> bought I think it will look great. Oh yeah! To quote the
>great
> Beavis and
> Butthead: My wife "KICKS ASS".
>
>
> Jav
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:36 EDT