-I've checked all the parts/tool places I can think of and nobody
has
ever heard of a 3" extension (it runs parallel to the wrench) for a
torque/socket wrench.
Thanks.
Tom
-Sure it's not supposed to be an extension perpendicular to be able to
reach the adjusting nut?
I think maybe there might have been a misprint if it told you it would
mount parallel to the torque wrench.
Probably ought to slide under the truck and take a peak and see if you
need a 3" xtension to be able to reach the nut if it is a socket
extension mounted on the torque wrench normally. BTW, if you dont have
this xtension on the wrench, you will change the value the torque is
actually being applied at.
Patrick
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:36 EDT