Re: RE: Do I need new shocks for drop?

From: Mark Kuzia (flyboy01@worldnet.att.net)
Date: Thu Feb 18 1999 - 21:55:57 EST


Can't use shackles on 97+ Dakotas. Today I ordered a set of AIM 2" springs and 3" pinion angle corrected blocks. I plan to order a set of Ground Force shocks tomorrow. Thanks for all the help guys!

Mark
P.S. I eventually plan to order rear leafs and the sway bar kit from Hotchkiss.
 
    -----Original Message-----
    From: Robert Trottmann <rotrottmann@davidson.edu>
    To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
    Date: Thursday, February 18, 1999 1:05 AM
    Subject: Re: DML: RE: Do I need new shocks for drop?
    
    
    I think a combo out back would be better than 3" blocks, maybe 2" shackles and 1" blocks, or something like that. I've heard not to go more than 2" w/ blocks. DO NOT get cheap blocks, blocks are cheap enough, get good ones. I have Bell Tech, 40,000 miles and counting, no cracks or anything evil like that.
    Later,
    Robert
    Vladimir Ryall wrote:

         The stock shocks should be fine, except the ride might be a bit rough, like a dump truck. Replacing the shocks with drop-shocks would be a wise investment in my opinion. Don't forget to replace or cut the snubbers... Vladimir "FASRAM"
        Home: http://home.austin.rr.com/fasram/
        Member: http://www.indyram.org/
            -----Original Message-----
            From: owner-dakota-truck@buffnet4.buffnet.net [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Mark Kuzia
            Sent: Wednesday, February 17, 1999 10:24 PM
            To: dakota-truck@buffnet.net
            Subject: DML: Do I need new shocks for drop?
            
            I am getting ready to order some AIM 2" drop springs and Summit 3" drop blocks tomorrow. The question I have is do I need to get new shocks on my 99' Dakota, or will the stock shocks work? I would appreciate any help on this subject. Markhttp://home.att.net/~flyboy01



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:38 EDT