Re: Re[2]: Questions:V6 FABM/FIPK

From: Peter L Anthony (panthony@pcn.com)
Date: Tue Mar 02 1999 - 13:03:53 EST


I got mine out with no effort and a 1/4" drive ratchet.
-----Original Message-----
From: mike kulczycki <dakota1994@hotmail.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Tuesday, March 02, 1999 12:18 PM
Subject: Re: Re[2]: DML: Questions:V6 FABM/FIPK

>yea, but did you have any problems taking the original bolt out?? do
>you thread it into where the little bracket is mounted?? because that
>is the bolt i tried taking and putting a longer bolt in, but it didn't
>work very good...... i was going to try cutting out the original bolt
>out of the plate holding it in and try and slide another bolt in there
>with a few washers and nuts......
>i'm sure i could make the s-bolt, but i'm just having problems taking
>the old stuff out....
>thanks for the help though....
>
>mike k
>94 v6, slt, 2wd, stuff....
>>
>>To make my S bolt, I bought a length of unthreaded 1/4" steel rod...
>cut off
>>the length I wanted... bent it up in a vise... then threaded the ends
>with a
>>simple threading tool. That way I didn't have to worry about fatiguing
>and
>>breaking a threaded piece when I bent it up and I had plenty of spare
>rod left
>>over in case I messed up my first try... It was easy to do... Even I
>got it
>>right the first time. I think it cost me like $5 to do.
>>
>>T.
>>
>>
>>______________________________ Reply Separator
>_________________________________
>>Subject: Re: DML: Questions:V6 FABM/FIPK
>>Author: <dakota-truck@buffnet.net> at smtpout
>>Date: 3/2/99 6:02 AM
>>
>>
>>yea i was not very happy.... 8 bucks in parts, and 104 in labor......
>>the thing is i broke that little bracket that holds the air cleaner
>bolt
>>right off. so i needed to drill another hole, which i didn't really
>>want to do myself..... my dad said they put lock tight in that
>hole??
>>is this true?? what is the way that everybody else does this??? i
>>would like to make a S-bolt and use that, but i don't want to break
>>another bolt off.... any advice???
>>
>>mike k
>>94 cc, v6, 2wd, stuff....
>>>
>>> $112?!?!???!?? Ouch! :-( (Did you go back to the dealer?) The
>air
>>>can hat hold-down bolt is just a carridge bolt which can be had for
>>less
>>>than $1 at any hardware store. One way to lengthen the bolt is to
>>replace
>>>that carridge bolt with a longer one from a hardware store, or bend
>>>up a piece of threaded rod into a sort of "S" shape. Either method
>>>can be done for under 5 bucks easy...
>>>
>>> -Jon-
>>>
>>> .--- stei0302@cs.fredonia.edu ------------------------------------.
>>> | Affiliations: DoD, EAA, MP Race Team, NMA, SPA, USUA. RP-SEL |
>>> | '96 Dodge Dakota v8 SLT CC (14.58@93.55), '96 Kolb FireFly 447 |
>>> `----------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
>>>
>>
>>
>>______________________________________________________
>>Get Your Private, Free Email at http://www.hotmail.com
>>
>>
>>
>
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:01 EDT