There are clips that are arrowed shaped, one side is solid on the arrow
and the other side is open to allow the clip to lock in, to remove these
just depress the open end while pulling the clip out, it will take a
little practice but you will get used to it. I think I broke two of
mine. The hood is painted black under the cover.
Chris Tesinsky
'99 Solar Yellow R/T CC
----Original Message Follows----
Date: Wed, 03 Mar 1999 10:04:51 -0700
From: "Ryan D. Krokosinski" <eqgroup@equinoxfinancial.com>
To: DML <dakota-truck@buffnet.net>
Subject: DML: Re: Underhood Liner Removal?
Reply-To: dakota-truck@buffnet.net
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
I'm thinking about removing my hood liner for more clearance for my
ram-air
box. It seems to be at least a half inch deep and I could use the
space. Am I correct in assuming that removal entails breaking off
the plastic tabs that hold it on? They look like some sort of
plastic
rivet (although I haven't looked very closely at them). Is there
anything else that needs to be done, or is it just the tabs holding it
on? Also, if anyone has done this, what lies in wait behind the
liner...
anything nasty or unsightly? I'm hoping it will look better
without
the liner. i.e. black paint. I hate surprises.
<p>Ryan K
<br>'99 R/T RC</html>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:02 EDT