I would be most interested in actual air flow/pressure at the TB??? Anybody
have this type equipment...??
Vladimir "FASRAM"
http://home.austin.rr.com/fasram/
http://www.indyram.org/
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net
[mailto:owner-dakota-truck@buffnet4.buffnet.net] On Behalf Of
Dak99RT@aol.com
Sent: Tuesday, March 09, 1999 11:42 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Re: Ram Air waste of money?
In a message dated 3/9/99 12:09:32 AM Eastern Standard Time,
catlin@erols.com
writes:
<< I actually took temperature readings on about every different setup
out there. This was done by inserting a temperature probe into the
air stream inside the different air filter setups. The end result
was the open air filters suck air that is about 30 to 40 degrees
hotter than a ram air set up. >>
Mike, where did you get your temp probe and for how much? Sounds like a good
idea. I thought about doing this a cpl of years ago with my intercool
Buick...if I can remember right they were around $180...also what kind of
window does it measure... -100 to +200? Any info would be great.
Thanks
Charles
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:06 EDT