I'm not sure on specifics, but I believe the +3 is just improved over +2...
possilby semi-synthetic... my '98 Ram calls for ATF+3... I have never
heard of a problem using ATF +3 where +2 was called for... I've heard if
you're doing the shift kit, you need a whole case... more fluid will come
out when you remove the valve body, and you will need about 11 quarts to
re-fill (for a 46RE, anyway). I used Valvoline 7176+3 fluid in my tranny,
but Mobil 1 Dextron III fluid in the transfer case.
>Well my 1997 Ram's Owners Manual says to use ATF+2 Type 7176. What is the
>difference between the ATF+2 Type 7176 and
>Dexron III or ATF+3? Would think that the same fluid would be used for all
>Rams and Dakotas. I am installing a shift kit on Sat. and would like to
>know the answer to the question.....
>Thanks,
>Brandon
>
>At 05:31 PM 3/11/99 -0500, you wrote:
>>Two questions: Will any old tranny fluid work? Dexron III or ATF+3??
>>What should I use?
>>Can I get a filter at Auto Zone? Is there some special filter I should
>>be using?
>>Thanks much,
>>Robert
>>
>>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:08 EDT