Re: Making power

From: Patrick Delgado (dadoctah@worldnet.att.net)
Date: Thu Mar 25 1999 - 13:47:59 EST


Water injection is a pre-historic method for controlling pre-ignition in
automotive engines. There are better, more effective ways of dealing with this
problem now. It was never intended(nor did it perform) as a hp builder only a
problem solver.
Dr. Pat
----------
>From: "Miller, Robert A" <RAMiller@sycamore.com>
>To: "'Dakota-truck@buffnet.net'" <Dakota-truck@buffnet.net>
>Subject: DML: Making power
>Date: Thu, Mar 25, 1999, 5:14 AM
>

> Fellow DML'ers
> Everybody on the list is always looking for more power, but I haven't heard
> one person talk about a water mist system in the intake. If ambient is dry
> and you inject a water spray into the inlet you increase the mass flow and
> more power is the result.
> Robert Miller
> Flame Red 99 DAK CC RT



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:21 EDT