I tried this and didn't get anything until I covered both holes. Then when
I removed my thumb I got a nice strong puff of hot air. So I guess my
gasket is alright.... damn. Thought I could maybe justify a new intake like
an M1 or mabey a cam swap or something...
---Mike, near Houston.---
My sig file=====> http://www.mikesdakota.com/signature.txt
My Dakota page==> http://www.mikesdakota.com
Dakota Webring==> http://web.wt.net/~mclark/webring/ring.html
----- Original Message -----
From: <JeffofSLU@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, March 30, 1999 11:02 PM
Subject: Re: DML: ping ? and a cam ?
> In a message dated 3/30/99 10:50:16 PM Central Standard Time,
> jdsmith4@yahoo.com writes:
>
> << As for the post about sticking my finger in the vent
> hole, is that either the breather hole or the PCV hole? >>
>
> The PCV hole, on the passenger side valve cover. Make sure the breather is
off
> the driver's side cover, the engine is warmed up, and you've got thick
skin on
> your finger!
> Probably a better way to do it would be to hold a piece of Saran Wrap
tightly
> against the hole. If you get pressure, everything's peachy, if you get a
> vacuum you've got the same annoying, aggravating, horsepower costing
problem
> that I've got and you may need counseling.
>
> Jeff
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:26 EDT