In a message dated 4/2/99 10:16:58 AM Eastern Standard Time, Dak99RT@aol.com
writes:
<<
This might be a little crazy but worth a try. Go to a small autobody shop
that has a mig welder. Take an old philips head screwdriver and have the guy
press the trigger on the mig gun and it will spit out a peice of copper line
(what the mig welder uses to weld with) long enough to get into the tight
space and weld the old screwdriver to the screw. It may take a while and
ruin
the screw and screw driver but it should come out. You may want to cover the
headlight and rest of the truck front as you wont want to burn any thing.
Just an idea.
Charles >>
On that tangent, if you're handy with a soldering iron you can probably do
the same thing with that. Lightly sand both surfaces and use alot of flux and
it should work well. in addotion you can remove the solder fairly easily as
well. You won't need a welder and you won't lose a screwdriver.
-Austin
Vipertruck
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:38 EDT