Re: Flow Specs on Magnum Heads

From: Jon Steiger (stei0302@cs.fredonia.edu)
Date: Wed Apr 07 1999 - 21:55:55 EDT


At 07:19 PM 4/7/99 , you wrote:
>In a message dated 99-04-07 09:19:34 EDT, you write:
>
><< yea Brad, me and my 2 buddies have large cams with ported heads. mine
> 512/520 lift 206/212@500. idle is fine. the largest of ours is 5sp 318 94
> with 545/550L 224/230@500-this is alot of duration for the street. It does
> idle, but it REALLY cuts up. It took us awhile to get it started, but now
> seems to be ok. I don't think I'd recommend it for a daily driver. Bare in
> mind these trucks are92-94. I've heard the new trucks with obd 2 are more
> temporamental when it comes to duration. I personally would not go above
> 225, esp in a A4
> >>
>
>
>I believe my motr is getting the same cam as yours. Bob wasnt too specific,
>as he does have a lot of secrets! Thats how he gets em to run 11's on the
>motor!
>

    Is that one of those "high rate of lift" cams like Hughes Engines sells?

                                               -Jon-

  .--- stei0302@cs.fredonia.edu ------------------------------------.
  | Affiliations: DoD, EAA, MP Race Team, NMA, SPA, USUA. RP-SEL |
  | '96 Dodge Dakota v8 SLT CC (14.58@93.55), '96 Kolb FireFly 447 |
  `----------------------- http://www.cs.fredonia.edu/~stei0302/ ---'



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:40 EDT