GSWillhite wrote:
> Mike, after reading about your FABM 13x2 3/4 install, I
> checked out Charles's figures on CFM (airflow). As you
> can see he didn't post a 13 incher, looks like you may
> have plenty of air if your TB is not ported:
>
> 565 cfm - B&F stock TB measurement.
>
> If it is ported, you may be close to B&F's stage 1:
>
> Around 640cfm. Below is Charles Smiths CFM calculations
> for a 14 inch.
>
> > 14" K&N 2 3/4" tall: 120.89 Square inches (728.96 CFM)
>
> You would probably be under 700 CFM with the 13 inch
> FABM. So CFM - FABM match would be close.
>
> GS -
Thanks for the info.. I'm on the list for a stage 1 TB. Looks like I
should still be safe.
-- Mike Williams -- VP Mid-Michigan Mopar Enthusiasts 99 Blk R/T CC Mark your calendars.. June, 6th our 2nd all Mopar Show see http://mid-mich-mopars.org
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:40 EDT