Yeah, I found it to be accurate to +/- 1 tenth. Occasionaly its off about 2
tenths to the optomistic side. Mph is always about 2-3 mph high. I got these
results from the 20+ runs I made at Milan Dragway last week.
Mark Kuzia
99 Dak 5-spd
15.02 @ 92.10 mph
-----Original Message-----
From: Bobby Nicks <bwnicks@ibm.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Tuesday, May 04, 1999 4:27 PM
Subject: Re: DML: RE: Re: V6 1/4 mile times??
>SmokinDakota wrote:
>>
>> Mark,
>>
>> I know the g-tech is pretty accurate, but that seems too fast for only
>> having those mods. I think I remember you saying he was going to go to
the
>> track with you. Has he? The only other mods he has compared to my dak are
>> the MSD ignition, coil, plugs, Edelbrock air assembly w/ homemade ram air
>> and 180 t-stat. So these mods combined are good for a about a 1 sec
>> reduction in e.t's?
>>
>> Steven 2me
>> http://www.smokindakota.com
>> AOL Instant Message = SmknDakTrk
>>
>> -----Original Message-----
>> From: owner-dakota-truck@buffnet4.buffnet.net
>> [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Mark Kuzia
>> Sent: Monday, May 03, 1999 2:27 PM
>> To: dakota-truck@buffnet.net
>> Subject: DML: Re: V6 1/4 mile times??
>>
>> I got a 15.80 @ 87mph driving my buddys modified 98 V-6 5-speed Dakota,
the
>> best he was ever able to do himself was a 16.20 @ 85mph. Driving style
has a
>> lot to do with the times. With a 5-speed you can get real aggressive off
the
>> line. If you want to see it, I have a page set up for his Dakota linked
off
>> of my page, go to http://home.att.net/~flyboy01 and click on the link
labled
>> "Sams fast V-6 Dakota".
>>
>> Mark Kuzia
>
>
>I don't have a G-tech, but I am in a F-body club (I have a old Camaro)
>and most of the guys in there have them and they also run at the track
>nearly every Friday night. They have found that the G-tech is about 2
>tenths (.2) faster than the actual times that they run at the track.
>
>Bob
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:58 EDT