Re: Re: Attn EFI M1 users! Need help with my MPI!!!

From: Jon Steiger (stei0302@cs.fredonia.edu)
Date: Thu May 13 1999 - 15:34:57 EDT


On Thu, 13 May 1999, Bob Tom wrote:

> On Wed, 12 May 1999 14:28:00 -0400, Jon Steiger wrote:
> > As far as the thermostat goes, I assume I just need to get one for an LA
> >318? Most parts stores list them by make and model though. Anyone know of
> >a vehicle and engine combination that would use the older t-stat?
>
> Jon
>
> The LA version of the 318 was introduced in 1967. This succeeded the old 318
> and had very few interchangeable parts.
>
> Some makes and models with the 318 would be:
> 1968 Plymouth Barracuda
> 1968 Dodge Dart
> 1967 Dodge Charger
>

  Thanks, Bob! I was at the parts store, so I had 'em look one up for
a '68 Barracuda. It looks like it will fit (I'm going to bring in the
manifold tomorrow), but it was a cast iron piece, so it was nasty
looking. :-( The neck on it wasn't anywhere near as long as the necks
on our trucks, but a hose clamp might hold it on there I suppose. (The
neck seemed narrower than the hose on my Dak too.) Tomorrow, I'm going
to bring it in, and we'll open up the boxes and see what's available.

                                              -Jon-

  .--- stei0302@cs.fredonia.edu ----------------------------------------.
  | Jon Steiger * AOPA, DoD, EAA, MP Race Team, NMA, SPA, USUA * RP-SEL |
  | '96 Dodge Dakota v8 SLT CC (14.58@93.55), '96 Kolb FireFly 447 |
  `--------------------------- http://www.cs.fredonia.edu/~stei0302/ ---'



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:03 EDT