Good point. Thanks!
Bob K.
-----Original Message-----
From: TXSTIM@aol.com <TXSTIM@aol.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Wednesday, May 12, 1999 10:47 PM
Subject: Re: DML: Re: RE: MPI single plane
>In a message dated 99-05-12 21:38:50 EDT, you write:
>
><< Well hood clearance should not be a problem as I believe the M1 is
shorter
> than the stock "beehive".
> Bob K >>
>The M1 is shorter, but the fuel rails are the same height. A
spacer/adapter
>is required to get the TB high enough for the throttle linkage to clear the
>rail. End result is that the air cleaner ends up in exactly the same
place.
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:03 EDT