Re: Water neck for M1/MPI manifold Was: F&B TB Stage 2

From: Jon Steiger (stei0302@cs.fredonia.edu)
Date: Sat May 22 1999 - 00:03:12 EDT


At 11:39 PM 5/21/99 , you wrote:
>In a message dated 5/21/99 6:56:48 PM Pacific Daylight Time,
>stei0302@cs.fredonia.edu writes:
>
><< BTW: Summit has a water neck (P/N SUM-377806) that works great! Well, I
> haven't actually bolted it onto the engine and flowed coolant through it,
> but I've heard good things about this type. (It uses an O-ring instead of
> a gasket.) Its chrome, and the looks and workmanship are a heck of a lot
> better than the cast iron junk you'll find in a parts store.
>
> >>
>
>
>Is it straight, and long, like the original Magnum one?
>

  No, its pretty short compared to the Magnum one, but it seems to be
longer than the cast iron one I saw at Autozone. Its 2" long, total. The
base is about 1/4" high, and the neck is about 1 1/4". The neck has a
diameter of about 1 1/2" except at the top where there is a lip which is 1 5/8"

                                               -Jon-

  .--- stei0302@cs.fredonia.edu ------------------------------------.
  | Affiliations: DoD, EAA, MP Race Team, NMA, SPA, USUA. RP-SEL |
  | '96 Dodge Dakota v8 SLT CC (14.58@93.55), '96 Kolb FireFly 447 |
  `----------------------- http://www.cs.fredonia.edu/~stei0302/ ---'



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:08 EDT