Re: Water neck for M1/MPI manifold Was: F&B TB Stage 2

From: Jon Steiger (stei0302@cs.fredonia.edu)
Date: Sun May 23 1999 - 17:05:56 EDT


At 07:54 PM 5/22/99 , you wrote:
>In a message dated 5/21/99 9:06:55 PM Pacific Daylight Time,
>stei0302@cs.fredonia.edu writes:
>
><< No, its pretty short compared to the Magnum one, but it seems to be
> longer than the cast iron one I saw at Autozone. Its 2" long, total. The
> base is about 1/4" high, and the neck is about 1 1/4". The neck has a
> diameter of about 1 1/2" except at the top where there is a lip which is 1
>5/8"
>
> -Jon-
> >>
>
>
>OK, should work, as I have no A/C anymore. Thanks!
>

  Brad, what difference would the A/C make? (I'm just wondering because
I'm planning to do the MPI install next weekend, so I'm trying to solve any
and all problems before then, and I'll be keeping my A/C.)

 Thanks!

                                               -Jon-

  .--- stei0302@cs.fredonia.edu ------------------------------------.
  | Affiliations: DoD, EAA, MP Race Team, NMA, SPA, USUA. RP-SEL |
  | '96 Dodge Dakota v8 SLT CC (14.58@93.55), '96 Kolb FireFly 447 |
  `----------------------- http://www.cs.fredonia.edu/~stei0302/ ---'



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:08 EDT