RE: ASP puley install

From: Jon Smith (jdsmith4@yahoo.com)
Date: Mon Jun 07 1999 - 11:53:15 EDT


Well, I don't have a passport to get into yankeeland
:)

I'll do the write up within the hour... Post to the
DML, or how does Steiger want it for the homepage?

--- "Densteadt, James" <james.densteadt@eds.com>
wrote:
> I'm in the Pontiac area in Michigan...you could
> drive if you really wanted
> to! You did only the crank pulley? What about the
> other altenator pulley?
> I have both pulleys ready to go on, with the 136 amp
> altenator, and a 900
> watt amplifier for my woofers....So I guess if you
> write up the info I'll
> try it and see what it all adds up too???? And you
> can probably get it put
> on the DML home page so everyone can view it!
> Sweet! Thanks and look
> forward to that info soon!
>
> -----Original Message-----
> From: Jon Smith [mailto:jdsmith4@yahoo.com]
> Sent: Monday, June 07, 1999 10:29 AM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: ASP puley install
>
>
>
> If no one else jumps on it, I'll do a write up
> tonight. It truely is simple :) BTW James, what
> area are you in? Might help to know if one was to
> offer to help ya :P
>
>
> --- "Densteadt, James" <james.densteadt@eds.com>
> wrote:
> > One other quicky! Has anyone written up a step by
> > step install for the
> > pulleys. I too can't overcome the obstacle of
> > working on my baby bymyself
> > with limited knowledge, but with a little help
> from
> > the DML I think I could
> > handle it. This would also help any others and
> void
> > out the popular
> > question of the month of "How do I do it?" Maybe
> > someone in the area could
> > meet up with me and give me a hand? Let me know
> if
> > anyone has any doco.
> > Tanks!!!
> >
> > James Densteadt
> > 98 R/T CC
> >
>
> ===
> Jon Smith -- Raleigh, NC
> '95 CC SLT 4x4 318 auto (15.653@89.12)
> MP comp, JBA headers, 8.5mm MSD wires, 14x3 FABM &
> SBBS, dual cat-back
> glasspacks, 180 degree thermo, spectre wire
> dividers, ASP underdrive crank
> pulley, Hayden 16" elec. fan
> http://come.to/killbilly
> ICQ # 9720504
> IM: Fast4x4
>
_________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at
> http://mail.yahoo.com
>

===
Jon Smith -- Raleigh, NC
'95 CC SLT 4x4 318 auto (15.653@89.12)
MP comp, JBA headers, 8.5mm MSD wires, 14x3 FABM & SBBS, dual cat-back glasspacks, 180 degree thermo, spectre wire dividers, ASP underdrive crank pulley, Hayden 16" elec. fan
http://come.to/killbilly
ICQ # 9720504
IM: Fast4x4
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:22 EDT